|
|
Post by Bow 1 on Mar 22, 2006 21:00:28 GMT -5
If you got any questions or concerns or need some help on a problem, particularly on the Binary Cams give me a shout, I bet we can figure it out pretty easy. I may be able to help on some others as well, I have worked out some problems for buds on Mathews and Hoyt as well as a few others. Most up to date on the BowTech Line though.
Keith
|
|
arkansasdon
Guest
Joined: May 16, 2024 9:11:31 GMT -5
|
Post by arkansasdon on Mar 22, 2006 21:32:45 GMT -5
Thats cool, apperciate ya for that post  |
|
|
|
Post by BackWoods on Mar 22, 2006 22:00:21 GMT -5
Bow
How far down on the cable are you tieing your drop rest rope in? I have been experimenting and it seems the farther down on the cable the better, When tied close to the shelf seems to pull on the down cable making it feel more like 65% rather than 80%? Just want your opinion. Thanks Steve(WHITETAIL25)
|
|
|
|
Post by Bow 1 on Mar 22, 2006 22:30:46 GMT -5
Here is what I posted on another link, and this will ellimnate the reduced let off. It also depends on the rest you are using. On my constitution, I have a Golden Key Infinity drop away conversion that I have the tie in about 1/2 below the shelf, and that just because of the way the rest is. On my allegiance its about 2 to 2 1/2 inch down. You do not want it too far down, try this method and see if you lett off does not change. If you get too far down you have the problem of the cord getting up in your way as the rest drops down. Here is the link www.racksandspurs.proboards38.com/index.cgi?board=techbow&action=display&thread=1142653348Also if you have any problems let me know, we can work it out, and make sure you tell me which rest your using. I can post more pics if you need them. Oh and on my sons BT Rascal I have a Caudle Special Vital Bow Gear drop away his is set about and inch down, again it depends on the rest your using. Keith |
|
|
|
Post by BackWoods on Mar 22, 2006 23:53:07 GMT -5
Bow1
Im using a trophy taker drop rest. Any info will help!!! Heres some karma for the help!!!!
|
|
|
|
Post by Bow 1 on Mar 23, 2006 6:14:05 GMT -5
Thanks. I have to be off to Drill this morning (make up)so this eve I will give you some pics of mine tonight. So you can see exactly how it is setup.
Keith
|
|
|
|
Post by Bow 1 on Mar 23, 2006 23:06:36 GMT -5
Hey bud here is my allegiance with TT set up. Another thing, make sure when you put the cord thorugh that you do it like mine kind of as you are looking from the rear go right side through the front to left side rear. Say from 1100 to 1900. This keeps the cord away from every thing important. Keith  |
|
|
|
Post by BackWoods on Mar 23, 2006 23:12:15 GMT -5
|
|
|
|
Post by Bow 1 on Mar 25, 2006 21:53:36 GMT -5
No problem, anytime, I may not have all the answer but between me and the Staff here we will get you answer.
Take Care and God Bless.
Keit
|
|
